Pump-Controlled Pressurisation System

Pump-Controlled Pressurisation System

It is a technological device developed to absorb the expansion occurring in heating and cooling systems and keep the plant pressure constant. The device removes the pressure increases during plant water heating by accumulating the expanded amount of water in the tank in a controlled manner. The expansion system ensures that a compensating water is sent back to the plant shrinking water amount with the help of the pump in the pump-controlled pressurization system during cooling of the water, and thus, prevents the installation pressure from dropping. The purpose of the system is to keep the pressure set in the heating and cooling plants constant. Tanpera pump-controlled pressurization system consists of 3 main components;
• Remote Control and Control Unit
• Hydraulic Unit
• Expansion Tank

Brochures and Catalogues

Pump-Controlled Pressurisation System Usage Areas

    It is used in heating and cooling systems to balance the variable water volume due to temperature change in all building and industrial applications.

Pump-Controlled Pressurisation System Advantages

    CONTROLLED OPERATION
    It provides a controlled operation at a constant pressure by measuring the pressure and loss leakage values on the installation with high precision.
    AREA SAVING
    Tanpera Pump-Controlled Pressurisation System covers a smaller area as it has an average expansion capacity of five times higher than conventional type membrane expansion tanks.
    OPERATING FOR A LONG TIME
    With the programmable deaeration mode, it provides efficient discharge of dissolved air in the plant.
    DEFECT INFORMATION
    The large LCD display and error notification system make it easy to identify the cause of the defect and tackle it. In addition, the amount of water taken from the network is measured with the high-precision flowmeter inside the device and fault information is provided in case of a leakage loss in excess water consumption.
    PROTECTION AGAINST POWER CUT-OFF
    With the backup power unit in the system, the plant is kept safe in case of a power failure.
    COMMUNICATION WITH BUILDING AUTOMATION SYSTEM
    It transmits traceable information and fault information to the building automation system with an advanced electronic communication protocol. Different communication protocols conformity can be achieved.

Proposal Form

Your personal information will not be shared with third parties according to confidentiality rules.

Offer Information Area

You can write your information, requests and requirements in the message section Information about the product you want to get offers about.